How to make a nuclear reactor that can't have a meltdown
Comment of the Day

April 18 2011

Commentary by David Fuller

How to make a nuclear reactor that can't have a meltdown

This is an informative article from Dvice on the much safer pebble bed reactors (PBRs) that China is developing. Here is a sample:
No Meltdowns

Let's just skip directly to the worst-case scenario, like in Japan, where failure of the coolant system caused the reactor to overheat uncontrollably. In terms of what would happen to a pebble bed reactor, this means that there'd no more helium coolant. So, okay, as you might expect, the reactor would start to get really, really hot. As nuclear fuel heats up, the uranium atoms start to move faster, making it harder for them to absorb extra neutrons and split, reducing the reactor's power. This is what's called negative feedback, and while it takes place in all reactors, the low fuel density of the pebbles magnifies it in a PBR. As the PBR continues to heat up, the negative feedback gets stronger and stronger until at about 1600 degrees Celsius, the core stabilizes at an "idle" temperature. This temperature is a solid 400 degrees short of what it would take to cause any damage to the fuel spheres or reactor vessel, which are made of a special kind of super strong graphite.

The upshot of all this is that a pebble bed reactor can have the entirety of its supporting infrastructure power down, blow up, get flooded, get stolen, run out of gas, or otherwise fail, all while the entire staff is on vacation, and the only thing that happens is that the PBR will warm up to its idle temperature and... Stay warm. No meltdowns, no explosions, no radiation leaks. The reactor will just sit there and radiate the heat it produces until you cool it back down or take the fuel out. This scenario was tried once, in a prototype PBR in Germany: they shut off the coolant and removed the control rods and watched, and nothing bad happened. A later inspection of the reactor and fuel pebbles showed no damage.

Of course, it's important to understand that PBRs aren't completely safe, and come with their own risks, including the potential for radioactive dust from pebbles rubbing against each other in the core and the difficulty of managing the circulation of the pebbles themselves. And PBRs still produce radiation, which is always dangerous, along with waste materials, although it's worth mentioning that the waste is already contained inside the pebbles, rendering it much safer, and it's so hard to get out of the pebbles that it's useless as a weapon. But the point is that PBRs seem to be safe in a lot of ways that conventional nuclear reactors definitely aren't.

David Fuller's view Once China has more of their planned pebble bed reactors (PBRs) up and running, I suspect that most of the rational objections to nuclear power will be assuaged.

The tradeoff for meltdown free reactors is that PBRs are more expensive to construct and have only about 1/30th of the power density of other reactors, but they are still a lot more efficient and reliable than windmills or today's solar power alternatives.

Back to top